High-quality 4-point harness MADE IN EUROPE with ECE approval | Type approved and approved according to European standard ECE 16.08
- 3" shoulder strap with lightweight aluminum adjuster
- 2" lap belt with steel adjuster
- 4-way release (release fitting)
- 6-way adjustment
- Delivery complete with attachments
Note: Shoulder strap can be looped (Please note that this fastening option must be clarified with the examiner in advance.)
H-shaped belts / sport belts suitable for the Toyota GR Yaris.
You can use these belts with the standard Toyota GR seats. You attach the 4-point belt to the original belt attachments. It is important that you use exactly these mounting points! The side belt is mounted at the bottom of the A-pillar, where the original belt is also attached. On the seat, you need the Schroth B23 kit, which is mounted on the original belt loop, and then you can attach the H-shaped belt there. You also mount the rear belt attachment to the center original belt buckle, and you can then route the belt through the ISOFIX recess. You attach the other belt to the side underneath the body. To do this, use the eyelets (the original screws must be removed). Mounting materials are included. The eyelets have the same thread as the original screws. You can then route the belt past the side of the rear seat bench. The front seats do not need to be removed. All you need to do is push the seat all the way back and pull the rear center console cover upwards. Then you can pull off the round side panels on the rear seat and access the screw for the belt buckle, where you attach the Schroth B23 bracket (must be ordered separately). A great bolt-on/plug & play solution for your Toyota GR Yaris. No trim parts need to be modified; the belts can be reinstalled at any time. You can either remove the standard belts or keep them. (The original belts can also be reused.) The Sandtler 4-point is now available in many great new colors. (You can find belts and the matching B23 kit in the link below!)