White special racing touch-up pencil for the marking of brand tyres, e.g. to point out the brand of the tyre manufacturer.
Quality and properties
High-grade quality
Durable gloss
Excellent adhesion
Quick-drying
Weather-resistant
Scratch-, bump- and impact-resistant
Very smooth surface avoids the attraction of dirt
Physical and chemical data
Basis of the binder: acrylate co-polymeres
Colour: white
Smell: solvent
Degree of gloss (at measurement angle 60° acc. to DIN 67530):
glossy: 60-65 gloss units
Efficiency:
not measurable, due to partial us
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 minutes
Dry to touch: after approx. 50 minutes
Cured: after approx. 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature-resistant: up to 80°C
Storage stability:
5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size: touch-up pencils with maximum nominal volume 12 ml
Environment and labelling
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using instructions
Before use, carefully read and observe the warning texts on the label!
Here you'll find technical product informations and security data sheets available for download.
To open the downloadable PDF files, you need an additional program like Adobe Reader which you can download free of charge on the internet .You can find the latest version of the Adobe Reader here