DTE PowerControl PerformanceKit
Toyota GR Supra A90
+57HP More Power*
+80NM More Torque*
up to -10% Less Fuel*
Inclusive TUEV-Zertification
For more than 3,600 models and vehicle types, a model-specific TÜV parts certificate is included. This means that the required change acceptance can be carried out easily at each test center. This acceptance only takes a few minutes and is carried out for example by TÜV, DEKRA or a KÜS expert.
2 years product warranty comprehensive protection for your vehicle
We provide comprehensive and beyond-the-law guarantees that cover our products. We also provide a 30-day money back guarantee, so you can feel the product in comfort of your own vehicle. Further details on the provided warranty you can find here.
*Proven performance figures based on EWG 80/1269: Extra power and torque are independently measured by TÜV Austria and are approved in the included part approval certificate. The performance data was measured over several runs using different test vehicles and in accordance with standard test methods. Our MAHA dynamometers are regularly monitored and calibrated in accordance with standard expert evaluation regulations. The performance data are determined by a VdTÜV-compliant differential measurement between the serial power of the measuring vehicle and the power consumed. Performance values are standardized according to the standard valid since 1980 in conformity with EWG 80/1269. Older measuring methods that are no longer compliant with the standard (eg according to DIN 70020 or ISO 1585) show about 15% higher performance values. Slippage, which would lead to a false identity card significantly higher performance values, is not included by DTE standards. Manufacturing tolerances and different fuel qualities may result in differences in performance figures. We recommend that you use high-quality fuels such as petrol with an octane rating of at least 98.It’s possible to save up to 15% in fuel costs, however these savings may depend on an adapted part throttle driving style under the same conditions.
3 selectable driving programs with 7 power levels each choose your favorite tuning setting
With DTE’s PowerControl, drivers have the option to choose their own and fully customizable driving program: Sport, Dynamic and Efficiency. Note: The Efficiency program is only available for PowerControl X.
Sport: In Sport mode, the engine’s parameters are modified for maximum performance. The vehicle reacts more directly for a more responsive driving experience.
Dynamic: The Dynamic mode is a great all-rounder and very well balanced for long distances. The vehicle reacts more dynamically for better agility throughout the rpm range.
Efficiency (for PowerControl X only): The Efficiency mode is focused on improving the engine’s fuel consumption. Savings of up to 15% can be achieved.
Efficiency mode for a better fuel consumption
The DTE tuning box PowerControl X has a selectable efficiency mode. This eco program reduces fuel consumption by up to 15%. With an optimized torque, extra power is already available at low rpm’s. Now you can change gears sooner and drive longer in lower gears to save fuel. That's how the tuning pays off quickly.
Multi-Map Technology
DTE have developed a multi-map tuning technology which can optimise up to nine different channels, all in real time. DTE’s PowerControl is able to control them all, no matter whether it is common rail pressure, boost pressure, turbo pressure, intake manifold pressure or air mass volume. Even the latest generation and most technically demanding engines are effortlessly optimised, all within a multi-dimensional multi-map environment. The driver is able to select between 3 different programs: Sport, Dynamic and Efficiency with 7 power levels each.
Reprogramming for vehicle change keep your tuning box up to date
A DTE engine tuning like PowerControl has the advantage that its installation is very easy. Furthermore, the dismantling back to stock condition is easy as well, e.g. when you change your vehicle. So, you can use your PowerControl tuning box again for your next vehicle. The reprogramming of the used tuning box for your new vehicle is free of charge 1x (PowerControl) and 2x (PowerControl X).
In 1996, Patrick van Drunen laid the foundation for a successful business: the tuning technician called the DTE Systems GmbH to life and started with an initial production of chiptuning modules. Within a few years, the customer base, the team and the production grew rapidly. In 2003, van Drunen merged the departments development and production in the modern business park Recklinghausen Ortloh. Ten years later, 2013, the company moved into the highly modern business and production building at the Maria-von-Linden-Street and thereby unite the departments development, manufacturing and logistics under one roof. DTE developed an efficient spatial concept that combines workflow and customer needs in a modern way. And with the dynamometer from MAHA and three assembly stations DTE is able to serve its customers ideally. Thanks to an in-house cable manufacturing and module production, all customers can rely on a quick production process, enabling DTE to stay flexible fulfilling the highest quality standards.