This modul fits for Toyota RAV4 XA3 2006 - 2013
Control function: Drivinglight
Headlamp type: with halogen headlights
The Comfort + All-In-One module retrofits your vehicle with a TFL / DRL daytime running light as well as a Coming / Leaving Home function. The installation is done without drilling, without screwing, and without soldering. The Comfort + All-In-One module is ready for vehicle-specific connection. The perfect alternative, if retrofitting a daytime running light and a Coming / Leaving Home function without the addition of additional headlights is desired on the vehicle. The module controls the low beam in the main headlight of your vehicle. The installation is easy, in which it is easily inserted into the fuse box in the engine compartment at the front. Due to its small design, the cover of the fuse box can be easily reinserted and the module is protected against moisture. When the engine is started, the low-beam headlights illuminate as daytime running lights. Individually, the luminosity of daytime running lights can be set between 25% - 40% - 60% 80% - 95% to even 100%. For programming, the light switch is used from the inside. The daytime running light function can optionally be switched on / off. Also the Coming / Leaving Home function (afterglow time can be set between 20sec and 5 minutes!). Very practical is this circuit, to route / track lighting when you leave the vehicle or approach the vehicle at night. So do not grope in the dark! You do not need an additional cable for the Coming Home function! The scope of delivery includes a vehicle-specific mounting and operating instructions.
Since it is possible due to manufacturing differences in the vehicle models that the fuse holders are differently occupied, please download the installation instructions supplied online before purchase and compare the fuse box with the illustration of the assembly instructions. Its ensures that the Comfort + module can be used on your vehicle. The illustrations are pattern illustrations. The assignments on the module differ depending on the vehicle.
Order- and Intend Notes:
The base module is designed for retrofitting with halogen headlights. If you have Xenon headlights, and / or 100% luminosity on the TFL / DRL circuit, please order the module for Xenon headlights as this has an additional power stage for the required voltage supply. The additional amplifier can be retrofitted to ncith on the base module!
The low beam headlights are normally operated with 80% as TFL lamps.
The module switches on at a voltage of approx. 13.6 V and at a voltage of approx. 12.9 V again.
In the case of individual vehicles, alternatively the main beam headlights (25%) or the fog lamps (80%) can be operated. In these cases, please order the appropriate module. If the controlled headlights are equipped with xenon burners (100%), you must also order the additional output stage. In this case, a module with an integrated auxiliary stage is delivered.
Here you'll find technical product informations available for download.
To open the downloadable PDF files, you need an additional program like Adobe Reader which you can download free of charge on the internet .You can find the latest version of the Adobe Reader here